Top 8 Best Multi-Purpose Welders to Buy In 2022 ( Complete Guide)

Are you in the market for the Best Multi-Purpose welders available?

No need to look farther; we’ve got you covered.

Some of the most popular welders on the market today are combination models that have two or more distinct types of welding accessories that enable you to weld in various ways.

Therefore, what makes these goods such good buys, which are the best on the market, and what should you look for when comparing the best multi-purpose welder alternatives available?’

The following is a concise summary of our most popular goods. Continue scrolling to learn more about selecting and operating multi-purpose welders.

Our Top Picks

Bottom Line
Pros
Cons
Eastwood Elite MP200i
Best Choice Overall
Check Prices
Bottom Line
The Eastwood Elite MP200i Multi-Process Welder has a dual-voltage input and a 30-amp breaker circuit. It may be plugged into 120 or 24 volts. This high-performance welding equipment is capable of M.I.G., T.I.G., and stick welding.
Pros
It comes with a gas regulator
Trafimet EP24 MIG gun
WP-17v TIG torch.
Compatible with 4- and 8-inch spools
Spool gun (optional)
Cons
Begin T.I.G. from scratch
Not equipped with a foot pedal
Hobart Multi Handler 200
Ideal for Metal Sheet
Check Prices
Bottom Line
Hobart’s first multi-process equipment for the consumer market is the Multi Handler 200 Welding Machine. If you like the Miller 215 but cannot justify the cost, the Multi Handler 200 is an excellent alternative. It is a dual-power machine, capable of operating on either 120 or 240 volts. It is equipped with an all-metal wire feed drive and can accommodate 4-inch or 8-inch wire spools.
Pros
A good substitute for the Miller 215 
Dual 120/240-volt power
Loads spools weighing two and ten pounds
Spool gun at the ready
Cons
T.I.G. regulator is omitted.
There is no T.I.G. foot pedal
YesWelder MIG-205DS
Best Budget Welder
Check Prices
Bottom Line
The YesWelder MIG-205DS Multi-Process Welder comes equipped with a flip-up plastic dust cover that shields the digital control panel from the demanding welding environment. The machine is equipped with a 2T/4T trigger lock, enabling extended welding runs to be completed without incurring hand fatigue. Dynamic arc control with synergic settings can monitor the arc as you weld, adjusting settings and altering factors in real-time to produce a higher-quality arc.
Pros
Ideal for beginners
LCD with high contrast
T.I.G. arc with a beginning lift
Select a model using a single button 
Cons
Not equipped with a spool gun
There is no T.I.G. torch provided

Top 8 Multi-Purpose Welders In 2022 | Our Top Picks & Reviews

Eastwood Elite MP200i

Best Choice Overall
Features
Versatile Operation
Dual Input Voltage Control
Spot weld timer
Weighs 34 lb
All metal wire drive

The Eastwood Elite MP200i Multi-Process Welder has a dual-voltage input and a 30-amp breaker circuit. It may be plugged into 120 or 24 volts. This high-performance welding equipment is capable of M.I.G., T.I.G., and stick welding.

The M.I.G. and T.I.G. reach 90 amps at 120 volts, while the stick mode comes at 70 amps. M.I.G. and T.I.G. achieve 200 amps when operated at 240 volts while sticking at 170 amps. If you want additional power, choose Eastwood’s Elite MP250i, which is geared for professional shop use, features casters, and provides extra top-end punch.

This welder can weld metal sheets up to 22 gauge and 3/8-inch steel. With the Eastwood Elite MP200i Multi-Process Welder’s computerized readout, it’s simple to keep track of your output figures. The settings knobs can be adjusted indefinitely. As a DC TIG machine, it is not meant for T.I.G. welding metal. However, Eastwood does sell an optional spool gun for M.I.G. welding aluminum.

The Eastwood Elite MP200i Multi-Process Welder has a gas regulator for T.I.G. shielding gas, a Trafimet ERGO PLUS 24 M.I.G. gun, and a WP-17v T.I.G. torch, all of which have 10-foot connections. The electrode clamp for arc welding is 13 feet long.

Positive
  • It comes with a gas regulator 
  • Trafimet EP24 MIG gun 
  • WP-17v TIG torch.
  • Compatible with 4- and 8-inch spools
  • Spool gun (optional)
Negatives
  • Begin T.I.G. from scratch
  • Not equipped with a foot pedal

Hobart Multi Handler 200

Ideal for Metal Sheet
Features
DC TIG, Stick, and MIG
20-200 amp range
24-gauge sheet to 3/8-inch steel
30 percent duty cycle
Quick select drive system

Hobart’s first multi-process equipment for the consumer market is the Multi Handler 200 Welding Machine. If you like the Miller 215 but cannot justify the cost, the Multi Handler 200 is an excellent alternative. It is a dual-power machine, capable of operating on either 120 or 240 volts. It is equipped with an all-metal wire feed drive and can accommodate 4-inch or 8-inch wire spools.

The Multi Handler 200 has a power output range of 20 to 200 amps. It welds from 24-gauge sheet metal to 3/8-inch thick steel plate in M.I.G. and flux core modes. In stick mode, the minimum thickness is 16 gauge, with a maximum thickness of 3/8 inch. T.I.G. mode operates in the middle of the other ranges, with material thicknesses ranging from 22 gauge to 3/16 inch steel.

Additionally, it contains a 12.5-foot T.I.G. torch but does not have a foot pedal heat control. However, it features a plug-in interface that accepts an optional Hobart foot pedal. Although it is not designed for aluminum welding as a DC TIG machine, you may easily connect the optional Spoolrunner spool gun and weld metal in M.I.G. mode. Both the M.I.G. gun and the stick welding electrode holder have a ten-foot lead.

Positive
  • A good substitute for the Miller 215 
  • Dual 120/240-volt power
  • Loads spools weighing two and ten pounds
  • Spool gun at the ready
  • Simple to use, using only two knobs
  • Provided is a T.I.G. torch
Negatives
  • T.I.G. regulator is omitted.
  • There is no T.I.G. foot pedal

YesWelder MIG-205DS

Best Budget Welder
Features
Dynamic arc adjustment
2T/4T trigger lock
Small footprint
Dual 120 and 240 power
MIG, flux-core, DC TIG, stick

The YesWelder MIG-205DS Multi-Process Welder comes equipped with a flip-up plastic dust cover that shields the digital control panel from the demanding welding environment. The machine is equipped with a 2T/4T trigger lock, enabling extended welding runs to be completed without incurring hand fatigue. Dynamic arc control with synergic settings can monitor the arc as you weld, adjusting settings and altering factors in real-time to produce a higher-quality arc.

This all-in-one welder is capable of M.I.G., T.I.G., stick, and flux core welding. Using a single digital button on the control panel, you can effortlessly choose between procedures. You’ll need to purchase a T.I.G. burner to use the DC TIG, but the setup is straightforward once you do. As a DC TIG, the YesWelder MIG-205DS Multi-Process Welder cannot be T.I.G. or M.I.G. aluminum. However, it can weld metal in stick mode with aluminum welding rods.

The YesWelder MIG-205DS Multi-Process Welder features a wide output range and can weld up to 1/4-inch thick steel. The option of 120-volt or 240-volt power completes an excellent collection of features, providing enough power at an affordable price.

Positive
  • Ideal for beginners
  • LCD with high contrast
  • T.I.G. arc with a beginning lift
  • Select a model using a single button 
  • It weighs only 33 pounds
  • The front panel cover is reversible.
Negatives
  • Not equipped with a spool gun
  • There is no T.I.G. torch provided

Lincoln Electric 210 MP

Features
Dual 120/240-volt input power
10-foot torch connection
Color LCD display
MIG, Flux-Cored, DC Stick, DC TIG
3-year warranty

The Lincoln Electric PowerMIG 210 MP is a very versatile and capable machine. It is capable of M.I.G., DC TIG, DC arc welding, and flux core operations and has a very broad output range of up to 140 amps when powered by a 120-volt input and 210 amps when powered by a 240-volt input.

With M.I.G. with flux core, you can weld as thin as 28 gauge at 20 amps; you can weld even thinner. On the other end, utilizing a 240-volt input and 210-amp continuous current, you can reach 5/16-inch thick steel plate.

One quality control concern with this machine is that the wire feed spindle is susceptible to being out of round, resulting in jams when the wire does not feed smoothly. It is a warranty-related matter. Lincoln will replace it, but you must submit your claim during the warranty period. The only other significant disadvantage is the absence of a T.I.G. heat control pedal.

On the bright side, Lincoln Electric is renowned for its high-quality construction and longevity. Lincoln continues these traditions with the Lincoln PowerMIG 210 MP multi-process welder, a three-year guarantee.

Positive
  • Simple on-screen configuration
  • Extremely broad 20-220 amp range
  • Includes a gas regulator
  • It comes with a nozzle for M.I.G. and flux core welding
  • Internal solenoid for gas
Negatives
  • Occasionally, the drive spindle will be out of round.
  • It does not include a T.I.G. torch

Lincoln Electric LE31MP

Features
MIG, Flux-cored, Stick, DC TIG
30-140 amp welding range
120-volt input power
Cast aluminum gearbox
Brass to brass torch connection

The Lincoln LE31MP, multi-process welding equipment, is rather outstanding. It includes a solid aluminum, adjustable gear-driven wire feed that accommodates wire spools weighing one pound or ten pounds. It features an inbuilt gas solenoid that regulates gas flow when the trigger is pulled for T.I.G. usage. The LE31MP multi-process welder has an external regulator for M.I.G. gas.

There are virtually no disadvantages to this versatile equipment, which can perform gas M.I.G., DC TIG, stick arc, and flux core welding. One drawback is that you must purchase a T.I.G. torch and heat control pedal separately to use the LE31MP’s highly rated T.I.G. technique (full Lincoln LE31MP review).

Another issue is that it is manufactured in Mexico despite its excellent build quality and falls short of the Buy American criteria required for specific federal contracts.

Users laud the machine’s welding quality and structure, complimenting each procedure it does. It has a power output range of 30-140 amps, which is sufficient to go from 24 gauge sheet metal to 3/16-inch thick plates. Lincoln offers a three-year warranty for the LE31MP.

Positive
  • Completely adjustable wire drive
  • It comes equipped with a gas regulator
  • Drive tension indication up to 3/16-inch plate 24 gauge
  • Internal gas solenoid for T.I.G. welding
Negatives
  • T.I.G. torch and pedal are supplied separately
  • Produced in Mexico and not Buy U.S.A. certified

Forney Easy Weld 140

Features
Stick, MIG and DC TIG welding
Infinitely adjustable controls
10 amp to 140 amp output
All metal wire drive
10-foot MIG connection

The Forney Easy Weld 140 is a multi-process M.I.G., flux core, D.C. stick, and DC TIG welding equipment of exceptional quality. Because it operates on 120 volts of input power, it can be used almost everywhere with access to household current. This machine features an all-aluminum wire feed drive that accommodates spools of 2 and 10 pounds of wire.

The ten-foot torch connection and electrode clamp allow you to position the machine in the work area, allowing you to move about and perform a better job. One disadvantage of this machine is that you must purchase a gas regulator to use the M.I.G. procedure. On the other hand, it necessitates the inclusion of a torch, electrodes, and gas mixture.

With an endlessly variable wire feed speed and amperage settings ranging from 10 to 140 amps, the Forney Easy Weld 140 can perform these procedures on sheet metal as thin as 32 gauge up to 1/4-inch plate steel or M.I.G. 1/8-inch aluminum using a spool gun. Forney provides a one-year warranty for the Easy Weld 140.

Positive
  • Holds two lb. and ten lb. rolls
  • Welds sheet metal up to 32 gauge and 1/4-inch plate
  • Infinitely adjustable controls
  • Generator-friendly M.I.G. gun in the Tweco style
Negatives
  • It does not include a gas regulator
  • T.I.G. requires extra components

Weldpro MIG200GDsv

Features
MIG, stick or TIG weld
Dual digital display
Dual 120/240-volt input
IGBT inverter power
2-year warranty

The Weldpro 200 Multi-Function adds your workplace to T.I.G., M.I.G., flux core, and stick arc welding capabilities. This machine features an all-metal aluminum driving system that ensures a precise, long-lasting wire feed. The feed mechanism is capable of mounting both 2-pound and 10-pound wire rolls. The machine’s weight of 30 pounds is due to the inverter-type IGBT power supply.

A lift-type arc starts with a 2T/4T locking trigger to maintain the arc lighted throughout extended welds. To use the machine in T.I.G. mode, you must purchase the appropriate gas regulator. For T.I.G. mode, there is no foot pedal heat control, and this machine is not compatible with one (Full Weldpro 200 review here). The Weldpro 200 does include a MIG-compatible gas regulator. The machine is equipped with T.I.G. and M.I.G. torches.

The Weldpro 200 features twin 120 and 240-volt inputs and a 40 to a 200-amp output range. It has automated speed and amperage adjustment to maintain arc output while welding. A two-year guarantee covers this product from Weldpro.

Positive
  • Provided with M.I.G. and T.I.G. torches.
  • It fits both two-pound and ten-pound rolls
  • T.I.G. arc commencing with a lift
  • It comes with a 13-foot T.I.G. connection
  • It Comes with a M.I.G. gas regulator
Negatives
  • Not included is a T.I.G. gas regulator
  • Not compatible with T.I.G. foot pedals

Vulcan OmniPro 220

Features
Full-color LCD display
10-220 amps
MIG/flux-core,
DC TIG/Stick Cast aluminum drive

A 4.3-inch color LCD screen is included with the Vulcan OmniPro 220 Multi-Process Welder. Additionally, this welder consists of an automatic setup feature. Select your method, material type, and thickness from the drop-down menus. You may still alter or create your settings, and this computer will remember them for future recall.

This equipment is capable of doing DC TIG and stick welding and M.I.G. and flux core welding. The dual-voltage Vulcan OmniPro 220 Multi-Process Welder welds up to 1/8-inch steel on 120 volts and 3/8-inch steel on 240 volts. If you choose to use T.I.G., you must purchase a torch, pedal, and regulator. As a DC-only welder, it is not appropriate for T.I.G. welding on aluminum, but you may connect the optional spool gun for M.I.G. welding on aluminum.

Vulcan’s OmniPro 220 Multi-Process Welder is inventive, adaptable, and well-liked by owners. Memory, automated settings, and a color screen are rarely available in the same system, especially at this price point. Harbor Freight contains 132 pre-loaded setup programs and allows you to store your own.

Positive
  • Ready-to-use spool gun
  • Memory recall for settings
  • 132 pre-loaded programs
  • Automatic configurations
  • Steel from 24-gauge to 3/8-inch
Negatives
  • There is no T.I.G. torch or pedal Provided
  • DC TIG is available that is suited for aluminum

Buyer Guide for the Best Multi-Purpose Welders

Reasons why multi-process welders make sense include the following:

  • Immediate labor savings from many procedures.
  • Space savings by the consolidation of many devices.
  • It is less expensive than acquiring many single-purpose devices.

Multi-process welding machines are ideal for small fabrication shops, car body experts, and do-it-yourself artisans.

One-person operations can save much with a single primary and backup machine that is still less expensive than a collection of specialist equipment.

Which Functions Are Required?

No one standard specifies the welding procedures that have to be included. Some have simple M.I.G. and stick processes, while others have many functions like T.I.G., flux core, and M.I.G., yet others will have a plasma cutter.

T.I.G. is, without a doubt, the greatest method for sheet metal. Both M.I.G. and flux core welding can be used on sheet metal, but only when the arc is readily controlled and the minimum output is less than 20 amps. Numerous sheet metal specialists prefer T.I.G. welders with a maximum output of fewer than five amps.

Stick arc and M.I.G. methods provide the best penetration for welding thick steel plates. Plasma cutters are an invaluable tool for fabricators. When all you have to do is flick a couple of switches and attach a torch to cut metal right where you are working, it truly saves money on labor.

Saving the trek across the shop to do a cut adds up to significant savings compared to two different machines.

What is the Fundamental Process?

Due to the nature of welding technology, any welding power source may be used to power almost any operation. The distinction between high-end computers with several processes and settings and less expensive machines with two processes and minimal settings is straightforward. One is more expensive.

It would help if you prioritized which welding processes. To keep prices down, each producer will promote a specific type of welding. Ascertain that the principal purpose of a machine corresponds to your priorities.

Do you require heavy-duty welding, the ability to cut rapidly, and the ability to be mobile? A MIG or arc welder equipped with a plasma cutter is needed.

If you do not cut frequently, it may be more cost-efficient to purchase a plasma cutter separately and combine it with a piece of multi-process equipment that includes M.I.G., T.I.G., and stick.

What Type of Work Do You Do?

To T.I.G. weld aluminum, you’ll need AC T.I.G. welding equipment. AC T.I.G. machines provide the best-looking welds on aluminum with the most strength.

If you’re planning to perform a lot of outside work, flux core or stick arc methods should be prioritized.

Accessorize and Customize

If you do not already own a T.I.G. or M.I.G. torch or require a heat control pedal for a T.I.G. machine, these costs should be factored into your pricing comparison. Specific equipment includes lift-type arc starters and high-frequency no-touch arc starters for plasma or T.I.G. electrodes.

These features contribute to cost savings by slowing the rate at which consumables degrade. You may discover that you do not require dual voltage input and can operate with 120 volts.

Which Is the Best Fit for You?

For the majority of welders, the Eastwood Elite MP200i will be the greatest value. Coming with all the modern-day features, it comes with a fine set of accessories, is well-built, and comes with Eastwood’s three-year guarantee, which you can extend for an additional two years for an additional fee.

The Hobart Multi Handler 200 Welding Machine provides the peace of mind that comes with a brand name, a five-year guarantee, and the Hobart reputation for customer care. Along with a robust national dealer and service network, you get a lot of power, spool gun capabilities, and the option to connect a foot pedal for T.I.G. work.

The MIG-205DS from YesWelder is our budget pick for a multi-process welder, including 200-amp M.I.G., T.I.G., flux core, and stick power. It features excellent design elements such as a flip-up dust cover on the front panel and easy-to-use single-button switching. It’s adaptable, with dynamic arc settings, and provides a lot of power for the money.

The Advantages of Multi-Procedure Welders

The primary advantage of multiprocess welders is that they provide access to two or more distinct types of welders for one price.

Even still, simply stating that scrapes the surface of what is possible with these incredible welding choices.

For example, having a combination welder enables you to train on a variety of various sorts of welders or to begin with one form of welding and then progress to another when you’re ready, all without the expense of a second welder.

Additionally, these welders are often more complicated since they must account for a greater variety of welding methods.

As a consequence, they are an excellent alternative for anyone searching for versatile welders.

If you’re a newbie, a multi-process welder enables you to practice M.I.G., T.I.G., Stick, and Flux Core welding on various types.

If you’re already familiar with one or more of those methods, you may study the others while utilizing the advanced choices accessible to you.

Finally, these alternatives enable you to weld a wide variety of metals.

While T.I.G. is superior at welding steel and M.I.G. is exceptional at welding aluminum, with combination choices, you can just flip the switch, change the nozzles, and work on multiple metals with the same welder.

What Are the Difficulties Associated with Multi-Process Welder?

A hand pressing a machine’s button Multi-process welding equipment is a space-saving device. Rather than buying three or more pieces of equipment that you must switch between for each project, you may utilize one single welder to meet the bulk of your demands. You’ll be able to weld and may be cut, allowing you to learn the disciplines more easily.

There is one drawback to many multi-process welders, and that is that they often do not give A/C TIG welding experience. However, because most welders do not work with exotic materials, this will not be a significant concern for the majority of welders in this category.

Additionally, multi-process welders take some time before switching between disciplines. You’ll need to replace your gas, unhook some things, re-plug others, and, in general, set up a new welder whenever you require something different. If you had three separate welders, you could have all of your equipment set up and ready to go in a matter of minutes.

Purchasing a brand name enables you to service the welder locally as well. While international brands provide extended warranties on their multi-process welders, this also implies that you must ship the welder to them for repair. If you select this route, search for a brand that will cover your shipping charges in the event of an incident, so you are not left with a hefty freight bill.

Additionally, you have the drawback that if your welder fails to operate for any reason, you are entirely out of luck. At times, it’s convenient to have a backup machine on hand to complete work.

Which Multi-Process Welding Combination Is the Best?

For many welders, the optimal multi-process welding tool is capable of M.I.G., T.I.G., and stick welding. You can use Plasma cutting in place of stick welding in some cases. It covers the majority of the jobs that the average hobbyist and do-it-yourself welder will wish to do.

Many of the new multi-process welders operate between 200 and 300 amps. It keeps them inexpensive but limits the kind of welding tasks you may do. If you want to perform more than a few fast welds on the house or automotive repairs, or neighborhood projects, you’ll want to upgrade to more extensive equipment in this category.

The Best Multi-Process Welders: Pricing Options

Numerous multi-process welders are more affordable on their own than the three or more pieces of equipment required separately. Consider this product to be the equivalent of a “combo meal” in the welding world. You may get an entry-level welder in this category for approximately $250, and occasionally less, depending on the features you choose.

At the high end of the price spectrum, some multi-process welders cost more than $2,000. These are often utilized in industrial settings and can support numerous operators from a single welder; for most home welders, budget around $800 for sturdy equipment. Professional welders may quickly locate several entry-level alternatives for under $1,500.

A Quick Overview of the Various Welder Types

After mentioning that combo welders can integrate M.I.G., T.I.G., Stick, and Flux Core welding, it’s worth briefly going through each of these possibilities.

M.I.G. is perhaps the most versatile of the four. It is pretty simple to utilize, albeit shielding gas is still required.

It enables the welding of various materials, from lighter metals such as aluminum to tougher metals, and the equipment is often more streamlined than other possibilities.

As such, they provide something for everyone, from novices to seasoned professionals.

On the other hand, T.I.G. welders usually are reserved for the latter type.

They are usually more complex and are not typically recommended for beginners unless they are devoted to welding steel, as this is by far the finest machine for the job.

Additionally, T.I.G. welding, if operated appropriately, can create the smoothest, most excellent finishes.

Stick welding entails pressing the nozzle on the metal and shaping it in this manner. M.I.G. and T.I.G. welding, on the other hand, generate an electrical arch, and their nozzles do not come into direct contact with the metal.

Finally, Flux Core welders are frequently employed as a starter choice since they do not require shielding gas, making them more accessible and inexpensive than other options, albeit they are also more restricted. You use them outside due to their lack of gas, so if you’re seeking to do any outdoor welding, you’ll want to search for a multi-process welder with a Flux Core option.

F.A.Q’s

1. What Exactly Is a Multiple Welder?

We’re sure we’ve already addressed this, but for the record, a multi welder is a welder equipped with a variety of welding nozzles and choices that enable you to weld in various ways.

M.I.G. and T.I.G. welding are distinct methods that need separate welders, but you may do both types of welding on the same equipment with multiple welders.

2. How Effective Are Combo Welders?

Yes! Naturally, like with any goods, it relies on the quality of the particular item.

While some combination welders are great, some fall short, and they are, on the whole, really excellent choices for the reasons stated above.

They’re ideal for switching between two or more distinct types of welding or learning a second style of welding without purchasing a new welder.

3. How Good Are ESAB Welders?

As mentioned previously, these versions are well-suited for agricultural welding in particular. Additionally, the price of these is moderately portable around the center of the pack. While more powerful solutions are available, the one discussed here gives quite a deal while being accessible and cheap.

4. Is there a maximum amount of current/voltage that I require?

No, however, as seen by this list, there is much variety in that respect. Contrast the amperage/voltage input/output with the values suggested for the task at hand.

Conclusion

The best Multi-Purpose welder reviews can assist you in locating the adaptable equipment necessary to tackle nearly any project that comes your way. Grab the one that’s right for you today at a low price, and you’ll have a fantastic welder that can save.

12 Comments
Show all Most Helpful Highest Rating Lowest Rating Add your review
  1. […] Electric is a market leader in arc welding and plasma cutting equipment. Lincoln, well-known for its emphasis on overall efficiency and […]

  2. […] Lotos CT520D is designed to perform a range of cutting and welding tasks, including the […]

  3. […] welder must possess. Each metal and metal alloy reacted differently to heat and was controlled in unique ways. When metals are heated, they expand and soften, resulting in various uses and […]

  4. […] Yeswelder Firstess MP200 multi-process welder from YesWelder is the first to integrate the most common welding processes with a plasma […]

  5. Outstanding post, I think blog owners should larn a lot from this weblog its very user friendly.

  6. […] customer when they require increased power to work with thicker stock? The Yeswelder MIG 250 Pro multi-process welder springs to […]

  7. Thanks for sharing superb informations. Your web site is so cool. I’m impressed by the details that you?¦ve on this web site. It reveals how nicely you perceive this subject. Bookmarked this web page, will come back for more articles. You, my friend, ROCK! I found just the info I already searched everywhere and just couldn’t come across. What a perfect web-site.

  8. Heya i am for the first time here. I found this board and I
    find It truly useful & it helped me out a lot.

    I hope to give something back and help others like you helped me.

  9. Hi there! I know this is kind of off topic but I was wondering if you knew where I could find a captcha plugin for my comment form? I’m using the same blog platform as yours and I’m having difficulty finding one? Thanks a lot!

  10. Regards for this wonderful post, I am glad I observed this internet site on yahoo.

  11. I have been reading out many of your posts and i can claim clever stuff. I will make sure to bookmark your blog.

Leave a reply

Welding n Cutting
Logo
Enable registration in settings - general